Eberspacher Easy Start Select for Airtronic and Hydronic Heaters
Additionally, it is compatible with the latest generation S2 D2L heaters. Please note that this controller does not have a built-in temperature sensor. (Click here) If you use an external sensor for your applications instead of the heater’s sensor, you will need to purchase an external sensor and connect it to the grey wire on your heater’s wiring loom.
Important Information
Compatibility: Only works with Airtronic and Hydronic heaters equipped with the latest version control unit, identified by the H-Kit logo on the heater dataplate (see image above).
Run Time: Continuous running is achievable only with AIRTRONIC heater models. The Eberspacher EasyStart Select has a maximum run time of 1 hour on HYDRONIC models.
Additional Diagnostics: Refer to the 'workshop menu' manual in downloads for additional heater diagnostics and controller settings.
Product Features
Workshop Menu
To access the workshop menu, press the < and > buttons simultaneously for 5 seconds. Navigate through the menu with items labeled from 1.1 to 6.4.
Fault Codes Retrieval:
The heater must be switched on.
1.1: Displays the current fault code.
1.2: Displays the last five fault codes recorded (F1 to F5) using `<` or `>` buttons.
Setting the Operating Time:
4.1: Before switching on the heater, select the desired value with `<` and `>` (Off or 10 to 720 minutes).
Dimensions
Width: 55 mm
Height: 46 mm
Depth: 9 mm
Package Includes
Warranty
Genuine Eberspacher 12-month warranty
Compatibility
This product is only compatible with Airtronic and Hydronic heaters fitted with the latest version control unit, identified by the H-Kit logo on the heater dataplate.
Compatible Eberspacher Air & Water Heaters
Air Heaters
Water Heaters